Skip to content
Energy, Engineering

Innovation promises to prevent power pole-top fires

RMIT University 2 mins read

Engineers in Australia have found a new way to make power-pole insulators resistant to fire and electrical sparking, promising to prevent dangerous pole-top fires and reduce blackouts.  

Pole-top fires pose significant challenges to power providers and communities worldwide. In March, pole-top fires cut power from 40,000 homes and businesses in Perth.

The 2020 Royal Commission into National Natural Disaster Arrangements found that power outages experienced by 280,000 customers from various energy providers during Black Summer fires were mainly triggered by events involving insulators and poles.

RMIT University Vice-Chancellor’s Postdoctoral Fellow Dr Tariq Nazir said these fires can occur when consecutive hot, dry and windy days are followed by damp and misty conditions.

“Dust and pollution builds up on power-line insulators, which enables electricity to spark and heat metal fixtures that can cause wooden power poles to catch fire,” he said.

In collaboration with researchers at the University of New South Wales, Nazir has improved the performance and safety of insulation materials for power poles at the lab scale. Their results and analysis are published in the high-impact international journal Advanced Composites and Hybrid Materials.

“Power utilities wash insulators on overhead power lines as a vital maintenance procedure to prevent problems like contamination and electrical sparking, which can cause pole-top fires and power outages,” said Nazir from RMIT’s School of Engineering.

“Our proposed silicone rubber composite material offers a potential solution that could save power companies time, maintenance resources and ultimately money from prevent damage to their assets.”

The composite material comprises chopped fiberglass, aluminium hydroxide and a type of clay derived from volcanic ash as additives.

“Our innovation could serve as a protective coating or paint for ceramic and glass insulators, providing extra defence against environmental factors such as moisture, pollution and fire,” Nazir said.

“We are keen to engage with fire-retardant coating manufacturers, electrical utilities, electrical insulation designers, manufacturers of electrical insulation products and regulatory agencies to further develop and prototype this work.”

How is this innovation different?

Nazir said their research’s novelty was in exploring the flame retardancy of insulator materials.

“Others are working mainly in electrical discharge resistance of material,” he said.

“I am trying to achieve both sides, whilst maintaining the required electrical insulation level of composites.”

Next steps

With the help of prospective partners, the team will aim to transition to larger-scale production processes for commercial applications and conduct more comprehensive durability testing under simulated outdoor conditions.

“Application-specific testing will assess suitability for various scenarios, and integration with existing systems will be explored,” Nazir said.

Nazir and his colleagues are behind another fire-protection innovation co-developed with the company Flame Security International – a fire-retardant paint that is already commercially available in Australia.

Innovation underpinned by peer-reviewed research and support from universities

Enhancing flame and electrical surface discharge resistance in silicone rubber composite insulation through aluminium hydroxide, clay and glass fibre additives’ is published in Advance Composites and Hybrid Materials (DOI: 10.1007/s42114-024-00874-x).

This work received financial support from RMIT through the Vice Chancellor’s Postdoctoral Research Fellowship. The research team also acknowledges the partial discharge test facility provided by the High Voltage Lab at UNSW Sydney.


Here are photos and videos (along with a photo captions document):

Contact details:

To arrange interviews and for other media assistance, contact Will Wright at or on +61 417 510 735.

More from this category

  • Energy, Federal Budget
  • 20/05/2024
  • 11:54
Adrian Merrick, Founder of Energy Locals

Our thoughts on the Government’s $300 power rebate

Last week’s Federal Budget brought with it some interesting news: starting July 1, 2024, every Australian household will enjoy a $300 rebate on their energy bills, which we’ll automatically apply to reduce your costs. At Energy Locals, we’re thrilled to see Australians receiving a bit of financial breathing room after the heavy cost-of-living pressures we've all faced. However, we question whether this rebate truly tackles the root causes of high energy prices. Most of the rises in Australia’s energy costs in the past few years stem from higher wholesale power costs. Power station operators, which includes the ‘big 3’ energy…

  • Energy, Engineering
  • 16/05/2024
  • 16:40
New Energy Nexus./Energy Lab

Supercharge Australia Innovation Challenge calls on startups to retrofit nation’s EVs

Sydney, 16 May 22024 - The second annual Supercharge Australia Innovation Challenge, “Retrofit Nation”, is being launched in Sydney during Climate Action Week. The Challenge is calling on startups to rapidly convert half the Australian vehicle fleet to electric vehicles (EVs), which is over 10 million vehicles. One of the immediately viable opportunities lies in retrofitting existing heavy vehicles with lithium batteries to support the move to an electric vehicle fleet. In 2022 our transport sector contributed to 19% of Australia’s emissions. Trucks, buses and light commercial vehicles account for about 40% of the total transport figure and the industry…

  • Energy, Government Federal
  • 16/05/2024
  • 08:58
Lighthouse Communications

Budget Fails Communities and Misses Opportunity to Make Australia a “Renewable Superpower”

Despite making promises of Australia becoming a world-leading renewable energy superpower in this week's Federal Budget, the Government failed to deliver on the fundamentals for local communities. On budget and off budget spending is concentrated on perpetuating outdated infrastructural norms and neglecting pivotal advancements in renewable energy transmission technology. While committing $22.7 billion over the coming decade to become a world leader in the energy transition, regional communities impacted by local energy projects say the Government has failed to support world leading transmission innovation and address energy policy failures at the expense of the environment and regional Australia. Spokesperson for…

  • Contains:

Media Outreach made fast, easy, simple.

Feature your press release on Medianet's News Hub every time you distribute with Medianet. Pay per release or save with a subscription.