Skip to content
Environment, Manufacturing

Not just for the big guys – sludge treatment success shows clean, green solutions work for SMEs too

CST Wastewater Solutions 4 mins read
  • Media:

An energy-saving sludge handling solution for small-to-medium food and beverage waste producers throughout Australasia and the Asia-Pacific has been shown in service to cut sludge volumes and waste transport and disposal costs to less than a seventh of previous levels.

 

A US in-service performance assessment of KDS sludge dewatering technology – conducted over 250 days to demonstrate accuracy and reliability – involved a mixed food waste disposal challenge involving oily and starchy wastewater treatment issues of a type typical of SME food and beverage processing operations and of commercial kitchen waste, cleaning and grease trap processes.

 

Wastewater treatment authority Michael Bambridge says the technology assessment – which is equally applicable to KDS operations in Australasia and SE Asia – also produced waste the is safer for wastewater maintenance and cleaning staff by radically reducing the amount of sticky, hazardous waste they typically have to handle.

 

“The in-service trial of KDS technology – which cuts sludge volume before dewatering from 403 tons to 53.52 tons afterwards – disproves the common misconception that energy-efficient and environmentally harmonious sludge separation wastewater treatment is mainly for the largest applications,” says Bambridge, whose company, CST Wastewater Solutions, is installing the low maintenance, low energy stainless steel system in industrial and municipal applications.

 

KDS systems have already been installed in potato processing, fruit processing, and municipal mixed waste applications in Australasia, where they ideally complement, and attach readily to, typical dissolved air flotation (DAF) technology widely used in food, beverage, and primary product processing industries.

 

“Efficient sludge dewatering can reduce the volume of sticky sludge produced by typical DAF installations by 70-90 per cent, making it lighter, drier, safer to handle, transport and dispose of or recycle,” says Bambridge, who has decades of Australasian and international experience in engineering cleaner and greener waste disposal plants, including in environmentally sensitive areas.

 

“But obstacles to wider adaptation of such technology by SMEs may include costly large dewatering systems, when SME’s typically need more compact and profitable ways to make sludge dryer, lighter, easier to handle, and safer to dispose of,” he says.

 

Oversized systems often have built-in high operating costs to achieve results, including costly use of polymer, electricity, and wash water. They also may require the presence of skilled engineering staff to optimise their performance, dedicated skills that SMEs often do not have and cannot afford.

 

The KDS Multidisc Roller technology from CST Wastewater Solutions – which requires no wash water, while capturing 90-97 per cent of solids – is engineered for simple, reliable operation, with its self-cleaning multidisc functionality helping to overcome the limitations and maintenance needs of technologies such as screw presses, belt presses and centrifuges.

 

The US in-service trial of the technology demonstrated:

 

  • Reductions of yearly sludge disposal costs from $US40,300 previously, to $US5,352 based on the extended trial period. (Approx $A60,000, $SG53,000 and $A8500 $SG7,000)
  • Zero water and extra polymer costs.
  • Power usage of less than half a kilowatt over an eight-hour day (0.48 kW)

 

“Treating wastewater is an energy-intensive and costly process, and a large source of both direct and indirect greenhouse gas emissions through energy use and release of methane and other gases, says Bambridge.

 

“In food processing waste treatment, energy typically accounts for a significant portion of the overall cost, often ranging between 15% and 50%, depending on the specific process and facility.

 

The Japanese-engineered KDS system – built to meet some of the world’s strictest regulations for food safety and quality – is designed to overcome such obstacles for sludge dewatering by SMEs, including where they use simple DAF as a primary sludge handling process.

 

KDS separators – all featuring the unique multidisc self-cleaning action - are available in hydraulic capacities from 264-4,092 gal/hr (approx. 1,000-15,490 litres) with input solids content of 2%.

 

Dried sludge handling benefits

 

Handling of sticky hazardous waste poses hazards to the wastewater treatment maintenance and cleaning staff, particularly in the event of a spill or preparing larger volumes of waste for transport.

 

“Just finding a facility prepared to take sludge waste is already an expensive process because there are fewer of them – and those that are left must charge more, because they are responsible for preventing groundwater leakage in an increasingly and necessarily strict regulatory environments driven by legislative and community pressure,” says Bambridge.

 

KDS technology’s unique self-cleaning dewatering and conveying system – with oval plate separation and transfer structure – prevents clogging and permits automatic continuous operation that handles oily and fibrous material with ease, says Bambridge.

 

The optional skid-mounted version of KDS technology offers potential users a highly effective plug-and-play solution to waste processing needs,” says Bambridge. Measuring only 3.8 by 2m, it offers the type of low-maintenance high efficiency that is so important where agribusiness, industrial and municipal operations don’t have the resources to place engineering staff on close standby.

 

SME applications for which the KDS separator is designed include:

 

  • Food and beverage processing waste, including production plants, snack foods, kitchen and restaurant waste, brewery waste, raw wastewater (primary screening), and sludge.
  • Intensive livestock and aquaculture operations, including abattoir, feedlots, fisheries, poultry and dairy farm wastewater and sludge. Cattle manure cake dryness of 25-35% is typically achieved. Pig farm raw manure and sludge, with cake dryness of 20-30%.
  • Barrel polishing water.The food and beverage industry demands highly polished metal surfaces to ensure hygiene and ease of cleaning.
  • Water-based paint wastewater, grease trap waste (which cannot be released untreated to sewerage systems), dyeing wastewater, waste oil, and plastic recycling.
  • Textile processing, with the KDS employed after the DAF processing stage
  • Sewage treatment, including raw wastewater (primary screening) and sludge to landfill

 

“As environmentally aware and quality-focussed wastewater treatment professionals, we don’t ever propose that just one solution is the total answer to all water quality issues – that would be absurd. There are many excellent technologies out there, of which KDS is an outstanding example in the SME separator category,” says Bambridge, whose company has decades of experience as a premier provider of innovative wastewater treatment solutions throughout Australasia and Asia, as well as an equipment supplier around the world.

 


About us:

 About CST Wastewater Solutions

CST offers the latest in specialised mechanical and process equipment, including locally manufactured technologies built for rugged conditions, all based on ‘hands-on’ experience in the industry and a clear understanding of client needs.

Beyond equipment supply, CST can to design, install, maintain, and in specific cases, operate, premium wastewater treatment systems. For clients who require a more comprehensive solution, CST constructs complete wastewater treatment plants in partnership with major specialist companies.


Contact details:

Jack Mallen-Cooper
PR Consultant
Whyte Public Relations
(02) 9901 4306
whytepr@whytepr.com.au

Media

Images
Lighter, drier, healthier and more easily recycled and transported dried sludge produced using KDS technology.Lighter, drier, healthier and more easily recycled and transported dried sludge produced using KDS technology.

KDSdryoutputtwo.jpg

Lighter, drier, healthier and more easily recycled and transported dried sludge produced using KDS technology.
Download media
Self-cleaning KDS systems are available in hydraulic capacities from 264-4,092 gal/hr (approx. 1,000-15,490 litres) with input solids content of 2%.Self-cleaning KDS systems are available in hydraulic capacities from 264-4,092 gal/hr (approx. 1,000-15,490 litres) with input solids content of 2%.

KDSnine.png

Self-cleaning KDS systems are available in hydraulic capacities from 264-4,092 gal/hr (approx. 1,000-15,490 litres) with input solids content of 2%.
Download media
DAF systems (such as the example pictured) are widely used in the food and beverage industry for solids removal, and they readily pair with KDS systems to achieve optimum liquid-solid separation. DAF systems (such as the example pictured) are widely used in the food and beverage industry for solids removal, and they readily pair with KDS systems to achieve optimum liquid-solid separation.

KDSfive.png

DAF systems (such as the example pictured) are widely used in the food and beverage industry for solids removal, and they readily pair with KDS systems to achieve optimum liquid-solid separation.
Download media
The smallest KDS separator weighs only 50kg, with a footprint of 0.2 sq m and can still handle up to 10kg of dry solids an hour.The smallest KDS separator weighs only 50kg, with a footprint of 0.2 sq m and can still handle up to 10kg of dry solids an hour.

KDSthree.png

The smallest KDS separator weighs only 50kg, with a footprint of 0.2 sq m and can still handle up to 10kg of dry solids an hour.
Download media

More from this category

  • Animal Animal WelfareRights, Environment
  • 18/03/2025
  • 08:30
Australian Koala Foundation

Deborah Tabart OAM Featured in Autumn Edition of RACQ’s Road Ahead

18 March 2025 DeborahTabart OAM, Chair of the Australian Koala Foundation (AKF), has been featured in the Autumn edition ofRACQ’s Road Ahead. The article…

  • Contains:
  • Environment, Federal Budget
  • 18/03/2025
  • 08:29
Australian Conservation Foundation

What to look for in federal budget 2025-26

Australia’s natural world faces an unprecedented crisis. With rampant habitat destruction and the accelerating impacts of climate change, numerous ecosystems are on the brink. In recent budgets, the Albanese government has taken initial steps to invest in nature and the climate, including the Future Made in Australia program, which earmarks billions for clean energy manufacturing and green metals. However, these early measures fall short of the robust, sustained investment needed to secure a truly sustainable, nature-positive future. Overall investment in nature and climate remains a tiny fraction of Commonwealth spending. Out of every dollar spent, less than one cent is…

  • Environment
  • 18/03/2025
  • 08:26
Lithium Royalty Corp.

Lithium Royalty Corp. Announces 81% Growth in LCEts for 2024 in First Full Calendar Year as a Public Company; Mariana Lithium Project Inaugurated in 1Q25

LRC announces 2024 annual revenue of $3.0 million; implies 233 Lithium Carbonate Equivalent Tonnes (LCEts)1, an LCEt increase of 81% year-on-year, driven by significant…

  • Contains:

Media Outreach made fast, easy, simple.

Feature your press release on Medianet's News Hub every time you distribute with Medianet. Pay per release or save with a subscription.